Kiln-to-Kiln Heat Recovery WOW tiles
Context
In this project, carried out at the Tendencias Cerámicas plant (currently WOW tiles) in Cabanes, we addressed the energy optimization of two kilns through the implementation of a heat recovery system.
The main objective was to transform an existing energy loss (hot air expelled through the chimney) into a useful source for the production process itself, thereby reducing the overall energy consumption of the facility.
Initial Situation
Furthermore, a large portion of the generated heat was expelled to the outside without being utilized, representing a clear opportunity for improvement in terms of energy efficiency and sustainability.
Project Objectives
- Reduce the energy consumption of the kilns.
- Utilize the residual heat generated in the process.
- Improve the efficiency of the combustion system.
- Minimize production interruption during installation.
- Implement a flexible and scalable solution for future improvements.
Implemented Solution
SYSTEMFOC designed and implemented a «simple» heat recovery system (kiln-to-kiln), based on capturing hot air from the kiln cooling chimney.
The system allows:
Capture clean, dry hot air without interfering with combustion gases.
Conduct it through insulated modular stainless steel piping.
Filter the air before its use in combustion.
Reintroduce it into the burner system, reducing the energy required to reach operating temperature.
Results Obtained
Although in this specific case it was not possible to quantify the energy savings due to limitations in data collection during visits, the system is designed to:
- Significantly reduce the energy consumption of the process.
Decrease indirect CO₂ emissions. - Improve the stability of the combustion process.
- Increase the overall efficiency of the plant.
- Reduce operating costs in the medium and long term.
Additionally, the system lays the foundation for future more advanced heat recovery optimizations.
Technical Characteristics
Modular piping in polished stainless steel (AISI 304).
Thermal insulation with high-density rock wool (30 mm).
Resistance to temperatures up to 600°C.
Removable and easy-to-maintain filtration system.
Automatic cold/hot air mixing control.
Possibility of complete system bypass.
Integration with existing kiln equipment.
These characteristics ensure durability, efficiency, and ease of maintenance.